Cambridge is three former towns with three different eras of housing — and three different closet problems. Every system we build is measured to the opening you actually have.
Cambridge was formed from three separate communities, and that history is still visible in the housing. Galt has the oldest stock — stone and brick homes near the river with high ceilings, thick walls and closets that were shallow to begin with or added long after the house was built. Preston sits somewhere in the middle, with a good deal of postwar and mid-century family housing. Hespeler and the newer subdivisions around the edges are recent builds with the standard modern fit-out.
That means there is no single Cambridge project. In the newer areas the work is familiar: replace the sagging builder wire, split one hanging rod into short and long zones, add a drawer bank so the dresser can leave the bedroom, and carry shelving to the ceiling instead of stopping at seven feet. Those homes have height available that the original fit-out simply never used.
In older Galt the priority shifts to measuring. Walls run out of true, openings are not square, depths are frequently under a modern standard, and a system sized in standard increments will gap at one end and bind at the other. Building to the actual wall is what makes the difference — and where a closet is genuinely too shallow to be worth reworking, a built-in wardrobe against a flat wall adds more usable hanging and drawer storage than anything that fits inside the original.
Knowing which part of Cambridge a home is in tells you most of what you need to know about the right approach.
Older stone and brick homes have settled framing and out-of-true walls. Systems cut to standard increments do not sit properly; systems cut to the measurement do.
Older Cambridge homes often have nine-foot ceilings above a seven-foot closet. That band is the most accessible storage in the room and it is usually empty.
Mid-century family homes have closets specified for a fraction of what a household owns today, and depths that can be too shallow for a hanger to sit square.
Newer subdivisions have the standard single rod and vinyl-coated shelf, which is a straightforward replacement rather than a rethink.
Red Rose serves every part of Cambridge. These notes describe the housing stock in each area — what the closets are usually like, and what tends to be worth changing.
The oldest part of Cambridge. Stone and brick homes with high ceilings, thick walls and shallow, non-standard closet openings.
Established homes on mature streets where original closets were added well after the build and rarely land on a standard width.
Largely postwar and mid-century family housing with closets sized for a much smaller wardrobe than a modern household owns.
A village core surrounded by newer subdivision growth, so closet openings range from non-standard older sizes to builder-grade wire.
Newer family subdivision streets where secondary bedroom reach-ins are usually the closets under the most pressure.
Older and rural-edge properties with irregular rooms, where a built-in wardrobe often makes more sense than a retrofit.
The most common Cambridge project across all three former towns. Built to your measured opening up to 130 inches wide and 10 feet tall, with hanging split by garment length — which matters most in the older Galt and Preston homes where openings are not standard.
Mostly a Hespeler and newer-subdivision project, where the primary bedroom has a walk-in fitted with a single rail. Those get rebuilt into L-shaped or U-shaped layouts that use the full height of every wall, with double hanging, a long-hang section and drawers built in.
The answer in much of older Galt and Blair, where closets are shallow or absent. A built-in wardrobe adds a full run of hanging, shelving and drawers against a flat wall, built around radiators, deep sills and out-of-square walls.
Front entries, mudrooms, laundry shelving and entertainment walls — including the awkward alcoves and stair landings that older Cambridge homes have plenty of and stock cabinetry never fits.
We have not published a photographed project gallery for Cambridge specifically. Rather than show stock photography or work from somewhere else and imply it was built here, we would rather point you at the real thing: photographed projects from real Ontario homes are on our portfolio and Instagram, and 100 customers across our Ontario service area have reviewed the work on Google.
If you would like to see examples closest to your own home type — a condo reach-in, a townhome primary closet, a full walk-in — ask when you get in touch and we will send relevant photos directly.
Pick your closet type, enter your wall dimensions, choose height and base style, then place the modules you want. It takes a few minutes and nothing is booked.
Your price updates live as you build, itemised by base system, drawers, height and base upgrades, and HST. No waiting for a callback to find out the number.
We review the design with you and confirm the real measurements in your Cambridge home before anything is cut, so the system fits the opening you actually have.
Your system is cut and built to those measurements in Ontario — sized to your walls rather than assembled from standard cabinet widths.
Our team removes the old shelving, patches the wall, and installs the new system. A single closet is typically a one-day install.
A 3D closet designer that prices your build as you go. You see the layout and the number before you talk to a salesperson, because there isn't one.
Every system is cut to the actual opening in your Cambridge home — up to 130 inches wide and 10 feet tall — so nothing is lost to filler panels.
We manufacture on our own equipment rather than importing a catalogue product, which is why non-standard widths, depths and ceiling heights are routine rather than surcharges.
Karan and Mehak oversee every project from the first call to the final install. The people who quote your closet are the people who deliver it.
Every Red Rose system carries a 2-year warranty, and because the parts are made here, a replacement is cut on the same equipment as the original.
100 reviews on Google at 5.0 stars, from homeowners across our Ontario service area.
Google does not publish a location for reviewers, so these are reviews from across our Ontario service area rather than Cambridge specifically.
All I can say is wow. Had a quote on a Friday late night and installed by the next Wednesday. Karan is outstanding — his attention to detail, his professionalism, and the quality of work is second to none. Highly recommend.
Super impressed with Karan and his team! Did quite a bit of research looking for the right company with the right price. Red Rose checked all the boxes. The closet looks absolutely stunning and was done quickly. Would 100% recommend.
Red Rose Custom Closets did a superb job designing and installing my custom closet — it's perfect! I needed to maximize a small space and Karan delivered exactly what I envisioned. Professional, prompt, and the quality is outstanding.
Karan from Red Rose Custom Closets was phenomenal to work with! We had 3 closets made and they are all so beautifully done. His attention to detail, quality of materials, and professionalism are unmatched. We couldn't be happier!
That is exactly the case for building custom rather than buying a kit. Older Cambridge homes have settled framing and walls that are not square, so a system sized in standard increments gaps at one end and binds at the other. We measure the real opening — including where it is wider at the top than the bottom — and build to it, so the finished closet sits flush.
Reach-ins are $650 for anything up to 49 inches wide, $750 across the 50 to 96 inch band, and $950 to $1,150 beyond that up to 130 inches. An L-shaped walk-in opens at $1,250. Add $125 per drawer, plus a proportional amount for ceilings above 7 feet. All figures are before 13% HST, and the online designer itemises it as you build.
Yes, and in an older Cambridge home it is usually the biggest single gain available. We build up to 10 feet. A seven-foot closet under a nine-foot ceiling has a whole band of accessible storage sitting empty — carrying shelving up recovers space you have already paid for.
Yes, and it is the most straightforward job we do here. We remove the wire, brackets and wall standards, patch the anchor holes, and install the new system in the same opening. The closet is generally back in use the same day.
All three of the former towns — Galt, Preston and Hespeler — along with Clemens Mill, Blair and the newer subdivisions around the edges. Red Rose designs, builds and installs custom closets throughout Cambridge and Waterloo Region. The price comes from the closet itself rather than the postal code.
Build your closet in the online designer and see the full price breakdown — reach-ins from $650 and walk-ins from $1,250, before 13% HST. No appointment needed to get a number.
Prefer to talk? Call Karan at (416) 258-1065